MB1504 |
RFQ for MB1504 Required Field |
 |
| Product | Manufacturers | Pack | D/C |
| MB1504 | - | - | 99 |
Serial data input is input using the Data pin, Clock pin and LE pin. The 15-bit programmable reference divider and 18-bit programmable divider are
controlled, respectively.
On rising edge of the clock, one bit of the data shifts into the internal shift registers.
When load enable (LE) is high level (or open), data stored in the shift registers is transferred to the 15-bit latch or 18-bit latch depending upon the control bit
level.
Control data "H" : Data is transferred into the 15-bit latch.
Control data "L" : Data is transferred into the 18-bit latch
Features |
| • High operating frequency: fIN MAX=520MHz (VIN MIN=0.20VP-P)• On-chip prescaler• Low power supply voltage: 2.7V to 5.5V (3.0V typ)• Low power supply consumption: 30mW (3.0V, 520MHz operation)• Serial input 18-bit programmable divider consisting of: Binary 7-bit swallow counter (Divide ratio: 0 to 127) Binary 11-bit programmable counter (Divide ratio: 16 to 2047)• Serial input 15-bit programmable reference divider consisting of: Binary 14-bit programmable reference counter (Divide ratio: 8 to 16383) 1-bit switch counter (SW) Sets divide ratio of prescaler• 2 types of phase detector output On-chip charge pump (Bipolar type) Output for external charge pump• Wide operating temperature: TA=40 to +85 |
|
Rating |
Symbol |
Condition |
Value |
Unit |
|
Power Supply Voltage |
VCC |
- |
0.5 to +7.0 |
V |
|
VPH |
MB1504H |
VCC to 12.0 |
V | |
|
VP,VPL |
MB1504/1504L |
VCC to 10.0 |
||
|
Output Voltage |
VOUT |
- |
0.5 to VCC +0.5 |
|
|
Open-drain Output |
VOOPH |
MB1504H |
0.5 to 11.0 |
V |
|
VOOP,VOOPL |
MB1504/1504L |
0.5 to 9.0 |
||
|
Output Current |
IOUT |
- |
+10 |
mA |
|
Storage Temperature |
TSTG |
- |
55 to +125 |
SupplierPost a Buying Lead |
